The Slicer

USD 745,00

Our most performance model, it’s ideal for hollow and powerful waves. The Slicer has a clean and distributed outline, we´ve added an accentuated bottom rocker to the nose and tail for better steep approaches, and the narrower tail helps generate agility and immediate response time at fast speeds.

Surfboards are available in Epoxy (EPS foam) and PU (polyurethane foam).

If you have any questions feel free to contact the shaper here.

Bottom Contour:
Single to double concave
Nose Rocker:
High
Tail Rocker:
High

Our surfboards are built in Costa Mesa, California. They are delivered in the whole of California State and the US.

Category:

Description

*All measures can be customized

Size Width Thickness Volume
5’7″ 18 1/4″ 2 3/16″ 23.8 L
5’8″ 18 3/8″ 2 3/16″ 24.3 L
5’9″ 18 1/2″ 2 3/16″ 24.9 L
5’10” 18 5/8″ 2 3/16″ 25.4 L
5’11” 18 3/4″ 2 1/4″ 26.7 L
6’0″ 19″ 2 5/16″ 28.2 L
6’1″ 19 1/8″ 2 3/8″ 29.7 L
6’2″ 19 1/4″ 2 7/16″ 31.0 L
6’3″ 19 3/8″ 2 1/2″ 32.4 L
6’4″ 19 5/8″ 2 9/16″ 33.6 L
6’6″ 19 3/4″ 2 5/8″ 35.9 L

We offer delivery service to San Diego – Encinitas – Oceanside – San Clemente – Newport Beach – Huntington Beach – Santa Monica – Malibu – Ventura – Santa Barbara – San Francisco

 

High-performance surfboards in California

Our performance series shortboard models were developed to maintain the highest level in whatever condition.

What are the best models for high performance in demanding surf?

The ideal boards for demanding surf have increased rocker (bottom contour) to be more responsive to the wave shape and vertical maneuvers, while having narrow tails that help in the execution of fast maneuvers and turns.

We recommend the models: The Slicer e Overall.

What are the models that have good stability without compromising performance? 

The surfer that’s after a friendlier and more stable board, that retains its performance, should look for a wider outline with more nose and width in the middle

We recommend the models: Sweetspot e UFO.

Looking for that ideal summer board for weaker and fatter conditions?

We recommend our Modern Fish model. it’s a very versatile board that works well from 1 foot to 6 feet. Another model we recommend is the Thumbs Up.

Our boards come in polyurethane (PU) or epoxy (EPS), with the option of being a thruster or quad setup, with lots of versatility. Take a stroll through our models and reach out to us if you have any doubts.

Having any doubts between polyurethane foam (polyester resin) or EPS foam (epoxy resin)?

Surfboards made out of PU (polyresin) are the most common around the globe even in regards to the professional surfing elite, this is because they are more predictable and consistent under your feet. The PU board has a slower flex pattern due to its higher foam density, this makes PU boards a good call for any wave condition.

Eps foam, on the other hand, is laminated with epoxy resin. The foam’s characteristics are similar to PU but have a very different construction, they are lighter, more durable, and have more pressure ding resistance from the surfer’s feet.

Their lighter weight comes with a downside, they are not ideal on bigger and heavier surf, especially when the wave surface is bumpy. Since the foam has a harder time absorbing impact because of the lack of weight, the impact of the bumps is transferred to the surfer’s legs. In this scenario, the PU has an easier time dealing with bumps on the wave surface.

Surfboards made in Costa Mesa, California.

0/5 (0 Reviews)

Reviews

There are no reviews yet.

Be the first to review “The Slicer”

Your email address will not be published. Required fields are marked *

WhatsApp chat